Technical document
PetroDPC Self-Adhesive Bitumen DPC TDS
Technical data sheet for PetroDPC self-adhesive bitumen damp-proof course rolls — 1.5 mm SBS-modified bitumen on HDPE film, 4.5", 9" and 13" widths, 15 m rolls.
PetroDPC is a self-adhesive bitumen damp-proof course membrane manufactured by Petroseal Enterprises in Lahore. Laid at plinth level and grade transitions, it forms a continuous barrier against rising capillary moisture in brick and block masonry.
Cold peel-and-stick application means no propane torch on site. Laps and junctions are overlapped by at least 100 mm and rolled firmly; the DPC runs through the full wall thickness and links to the floor damp-proof membrane where the detail requires.
Key specifications
Values shown are taken from the published brochure/TDS. Project acceptance follows the approved batch certificate and consultant specification.
- Roll width / length
- 4.5" (114 mm), 9" (229 mm), 13" (330 mm) / 15 m
- Application
- Self-adhesive, peel and stick — no torch
- Composition
- SBS-modified bitumen on cross-laminated HDPE film, release liner
- Effective thickness
- 1.5 ± 0.08 mm — EN 1849-1
- Tensile force L / T
- ≥ 200 / ≥ 200 N/50 mm — EN 12311-1
- Elongation L / T
- ≥ 150 / ≥ 150 % — EN 12311-1
- Watertightness
- Pass, 24 h at 60 kPa — EN 1928 method B
- Low-temperature flexibility
- ≤ −30 °C — EN 1109
- Flow resistance
- ≥ +70 °C — EN 1110
- Application temperature
- +10 °C to +40 °C
- Shelf life
- 12 months from production, stored upright below 35 °C
Applications
- — DPC course at plinth / ground-floor level
- — Cavity wall and partition damp barriers
- — Foundation and basement-grade transitions
- — Retaining wall and planter damp isolation
Referenced standards
EN 1849-1 · EN 12311-1 · EN 1928 · EN 1109 · EN 1110 · EN 13501-1
Related products
- PetroDPC
Damp-proof course bitumen rolls for walls, plinths, and foundations.