Petroseal
PetroSelfGrip
PetroSelfGrip is Petroseal's cold-applied self adhesive bitumen membrane—a rubberized compound on the underside with a removable release film. Peel, position, and press—no propane torch required. Available in 1.5mm for internal wet areas and light-duty detailing, and 2mm for terraces, bathrooms, and repair zones where flame-free application is preferred or mandated.
Key features
- — 1.5mm and 2mm gauges for detail and light-duty waterproofing
- — No torch—safe for occupied buildings and confined spaces
- — Strong initial tack; roll with hand roller for full bond
- — Compatible with primed concrete, masonry, and metal flashings
- — Ideal for bathrooms, kitchens, and parapet detailing
Applications
- — Bathrooms, kitchens, and internal wet rooms
- — Terrace and balcony repair strips
- — Parapet, curb, and penetration detailing
- — Supplementary layer under torch-applied systems
Technical specs
Thickness
Roll width
Roll length
Surfacing
Pakistan climate recommendation
Apply only on dry, primed substrates above 5°C. Press laps firmly; seal terminations with compatible mastic.
| Thickness | 2mm |
| Roll width | 1m |
| Roll length | 10m |
| Surfacing | PE film (underside) |
Performance profile
Relative orientation only — not laboratory test results or certified performance percentages.
Technical downloads
TDS and brochures for this product. Open the HTML specification page or download the PDF.
- Elastogrip PL-150 / PetroSelfGrip 1.5 mm TDSPDF ↓
SBS self-adhesive modified bituminous membrane — cold-applied peel-and-stick grade for wet areas and detailing.
- Elastogrip PL-200 / PetroSelfGrip 2 mm TDSPDF ↓
SBS self-adhesive modified bituminous membrane — 2 mm grade for terraces, bathrooms, and flame-free detailing.
Technical guides
Application notes and specification articles for this product.
- Self-Adhesive Bitumen Membrane for Bathrooms and Terraces
PetroSelfGrip delivers flame-free waterproofing for bathrooms, terraces, and detail zones—when to use 1.5mm vs 2mm and how to bond correctly on Pakistani substrates.
- Basement Waterproofing with Bitumen Membrane Systems
Design and install basement waterproofing with PetroGrip SBS torch membrane and PetroSelfGrip sheets—substrates, laps, protection boards, and Lahore-manufactured systems for nationwide projects.
- Torch-Applied Waterproofing: PetroGrip Site Practice
How PetroGrip torch-applied bitumen membranes are specified, primed, and welded on roofs and podiums—with quality checks that protect your warranty.
- Positive-Side vs Negative-Side Waterproofing (Basements & Tanks)
Where the membrane or coating sits relative to water pressure—and when PetroGrip SBS on the outside beats internal injection or coating remediation.
Related applications
Where this product is typically specified.
Related systems
System pages that use this product.
Application map
- Wet room: 1.5mm full-floor bond under tile bed.
- Detail: 2mm strips at corners, pipes, and upturns.